Oil Cooled Transformer with inbuilt Automatic Voltage Regulator
RANGE : Upto 10000 KVA in 11 & 33 KV Class
General Information
ICON covers a wide range of Oil Filled Distribution Transformers with On Load Tap Changer (up to 10000 KVA in 11 KV & 33 KV Class) conforming to the international standards of quality and safety. These transformers are designed and developed using latest technologies and can be provided with a variety of terminations so as to suit the requirements for new installation or replacement.
Optimum efficiency is ensured by delicate proportioning of core and winding looses using CRGO M3 to M5 MOH Lamination, Electrolytic Grade 99.9% pure copper, with Transposition in L.V. coil for current sharing in parallel Conductors, Electric grade press paper, boards and mineral oil. Thus better regulation is achieved resulting in longer life. Careful designing also reduces noise level to the minimum.
Application
Our products are widely used in the following areas:
- Furnaces
- Test Rooms
- Research Stations
- Paper Industries
- Electroplating
- Electrolytic Processes
- Hotels
- Hospitals
- Tea Gardens
- Defence Installations
- Space Research Centers
- IT Industries
- Steel Plants
- Cement Factories
- Glass Works
- Chemical Industries
- Plastic Processes
- Capacity :Up to 10000 KVA
- No. of Phases :3 Phase
- Frequency :50 Hz.
- Voltage Range :11 KV/ 33KV
- Tapping :+5% to -15% Taps on H.T. Side in steps of 1.25% each..
- Insulation :Class 'A'
- Vector Group :Dyn 11
- Duty Cycle :Continuous
- Winding :Copper Wound
- Terminals :As per required
- Rating & Diagram plate :Earthing terminals
- Lifting lugs :Thermometer pocket
- Oil Conservator with drain plug :Air release hole with plug
- Oil Level indicator :Explosion vent with diaphragm
- Top-filter Valve :Inspection cover.
- Silica gel breather :Drain –cum-bottom-filter valve
- Cooling radiators :Uni / Bi- directional rollers
- Buchholz relay with alarm and trip contact :Magnetic oil level gauge with alarm contact
- Pressure Release Valve :Marshalling box to house O.T.I. and W.T.I
- Cable Box on H.T. Side :Cable Box on L.T. Side.
- Oil Temp. Indicator with alarm & trip contact :RTCC (Remote Tap Changer Control) Cubicle
- Winding Temp. indicator with alarm & trip contact :Electronic Automatic Voltage Controller
- More efficient
- Non toxic
- Highly safe
- Non flammable
- Space saving by placing near the load end
- Low Noise
- Low Maintenance
- Can be supplied with off circuit links
- Low replacement cost.
- Undistorted output characteristics ie. no wave from distortion.
- Moving parts on L.T. side and it’s mass is extremely low, only few lb-inch torque.
- Energy savings.
- High efficiency (about 99%) and minimum no load losses.
- Simplicity and flexibility of design
- On load stepless voltage variation
- Long service life
- Impulse tested
- Regulating coils are wound with rectangular conductors on their edge, thus giving high mechanical strength compared to other designs.
- Capacity :Up to 10000 KVA
- No. of Phases :3 Phase
- Frequency :50 Hz.
- Voltage Range :11 KV/ 33KV
- Tapping :+5% to -15% Taps on H.T. Side in steps of 1.25% each..
- Insulation :Class 'A'
- Vector Group :Dyn 11
- Duty Cycle :Continuous
- Winding :Copper Wound
- Terminals :As per required
- Rating & Diagram plate :Earthing terminals
- Lifting lugs :Thermometer pocket
- Oil Conservator with drain plug :Air release hole with plug
- Oil Level indicator :Explosion vent with diaphragm
- Top-filter Valve :Inspection cover.
- Silica gel breather :Drain –cum-bottom-filter valve
- Cooling radiators :Uni / Bi- directional rollers
- Buchholz relay with alarm and trip contact :Magnetic oil level gauge with alarm contact
- Pressure Release Valve :Marshalling box to house O.T.I. and W.T.I
- Cable Box on H.T. Side :Cable Box on L.T. Side.
- Oil Temp. Indicator with alarm & trip contact :RTCC (Remote Tap Changer Control) Cubicle
- Winding Temp. indicator with alarm & trip contact :Electronic Automatic Voltage Controller
- More efficient
- Non toxic
- Highly safe
- Non flammable
- Space saving by placing near the load end
- Low Noise
- Low Maintenance
- Can be supplied with off circuit links
- Low replacement cost.
- Undistorted output characteristics ie. no wave from distortion.
- Moving parts on L.T. side and it’s mass is extremely low, only few lb-inch torque.
- Energy savings.
- High efficiency (about 99%) and minimum no load losses.
- Simplicity and flexibility of design
- On load stepless voltage variation
- Long service life
- Impulse tested
- Regulating coils are wound with rectangular conductors on their edge, thus giving high mechanical strength compared to other designs.